4 Replacement Procedures 4.26 Fluorescent lamp
4-102 Satellite A40 Maintenance Manual (960-458)
4. Remove the board assembly, adhesive tape, light guide and cover assembly bottom (L).
1) Remove the board assembly.
2) Remove the adhesive tape securing the sheets (four points).
3) Remove the sheets and light guide.
NOTE: No penetration of foreign object is indispensable not to scratch the sheets.
4) Remove the screw and cover assembly bottom (L).
NOTE: Maximum value of torque is 1.5kg•cm.
Board assembly
Double-sided tape
Adhesive tape
Sheets and LGP
Double-sided tape
Double-sided tape
Adhesive tape
Adhesive tape
Screw
Cover assembly bottom (L)
Screw
Figure 4-84 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (4)
To Next Page
Loading...
