30
Getting Started
Connecting to a power source
To connect AC power to the device:
1 Connect the power cord/cable to the AC adaptor.
Handling the cord on this product will expose you to
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
Wash hands after handling.
2 Plug the AC adaptor cord into the DC-IN located on the
back of the keyboard dock.
To locate your DC-IN port, please refer to your Quick
Start document.
3 Connect the power cord/cable to a live electrical outlet.
The DC-IN charging indicator light on the indicator panel
glows.
Never attempt to connect or disconnect a power plug
with wet hands. Failure to follow this instruction could
result in an electric shock, possibly resulting in serious
injury.
The indicator light for the device’s main battery gives you
an indication of its current charge:
❖ Glows amber while the main battery is charging
(AC adaptor connected)
❖ Glows white when the main battery is fully charged
❖ Is unlit when the main battery has discharged, the
battery is not charging, or the AC adaptor is not
plugged into the device or AC outlet
❖ Flashes amber when the charge of the main battery
is low and it is time to recharge the main battery or
plug in the AC adaptor
If the DC-IN charging indicator light flashes amber during
charging, either the main battery is malfunctioning, or it is
not receiving correct input from the AC power supply.
NOTE
NOTE
To Next Page
Loading...
Need help?
General