4 Replacement Procedures 4.5 ODD Bay Module
Disassembling the ODD Bezel
Disassemble the ODD drive according to the following procedures and Figure 4-7.
1. Push out on the ODD bay module in the direction of the arrow.
ODD bezel
ODD drive
Figure 4-7 Removing the ODD Bezel
Assembling the ODD Bezel
Assemble the ODD drive according to the following procedures and Figure 4-7.
1. Gently insert ODD bezel into place. Check that the ODD bezel slides in and stops
with a click.
4-18 Satellite/Satellite Pro/L630/L635 Maintenance Manual
To Next Page
Loading...
