4 Replacement Procedures 4.10 System board
4.10 System Board
Removing the System Board
NOTE: Be careful of the eject button for the PC card. It can be damaged when removing
the board. Make sure it is securely installed.
Remove the System Board according to the following procedures and Figure 4-14.
1. Release one M2.5x5 black flat head screw securing the system board.
2. Remove the system board.
M2 5x5 black flat head screw.
System board
Figure 4-14 Removing the system board
4--28 Satellite/Satellite Pro/L630/L635 Maintenance Manual
To Next Page
Loading...
