4 Replacement Procedures 4.18 Switch board and button board
4--48 Satellite/Satellite Pro/L630/L635 Maintenance Manual
Installing the Switch board and Button board
Install the button board according to the following procedures and Figure 4-29.
1. Seat the button board bracket in the correct position.
2. Secure button board bracket with four M2x2.5 black flat head screws.
3. Seat the button board in the correct position
4. Secure button board with three M2x2.5 black flat head screws.
5. Connect the touch pad flat cable and button board cable.
6. Seat the switch board in the correct position
7. Secure switch board with two M2x2.5 black flat head screws.
8. Connect the switch board cable.
To Next Page
Loading...
