4 Replacement Procedures 4.6 Keyboard
4.6 Keyboard
Removing Keyboard
Remove the Keyboard according to the following procedures and Figure 4-9.
1. Release the following 11 latches on the keyboard cover, in that order:
- One latch on right side and one latch on left sides.
- Four bottom latches.
- Five front latches.
2. Remove the keyboard cover.
3. Remove four M2.5x2.5 black flat head screws.
4. Disconnect the keyboard cable from CN250 on the system board.
5. Remove the keyboard.
M2 5x2 5 black flat head screw..
Keyboard cover
Keyboard
CN250
Latch
Figure 4-9 Removing the keyboard
4-20 Satellite/Satellite Pro/L630/L635 Maintenance Manual
To Next Page
Loading...
