4.6 Keyboard 4 Replacement Procedures
Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-21
Installing the Keyboard
Install the keyboard according to the following procedures and Figure 4-9.
1. Connect the keyboard cable to CN250 on the system board.
2. Secure the keyboard with two M2.5x2.5 black flat head screws.
3. Place the keyboard cover in the correct position and secure the following 11 latches,
in that order:
- One latch on right side and one latch on left side.
- Four bottom latches.
- Five front latches.
To Next Page
Loading...
