3.9 Communication 3 Diagnostic Programs
Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance
Manual 55
Check whether it supports ECP (Extended Capabilities Port) feature.
Subtest 02 IrDA
This test item supports the transfer rates of 2.4Kbps, 9.6Kbps, 19.2Kbps,
38.4Kbps, 57.6Kbps, 115.2Kbps , 0.576Mbps,1.152Mbps and 4.00Mbps. The
unit under testing (UUT) is called Slave, that requires a unit whose IrDA works
normally(that is called Master) for transferring data between Slave and
Master..
Below are the operation steps:
? Prepare a Master whose IrDA works normally, then run the test
item from Main Menu, The master stays here to wait for slave
requesting.
? Prepare a slave. User should choose the test item from Main Menu
and set parameters.
Below is the Slave Testing window.
To Next Page
Loading...
