Toshiba Satellite M40 - Installing the ODD Bay Module

4 Replacement Procedures 4.8 ODD Bay Module
4-38 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
Figure 4-25 Removing the ODD bay module
Installing the ODD Bay Module
Install the ODD bay module according to the following procedures and Figure 4-24, 4-25.
1. Place the ODD bay module in the correct position and slide it in.
2. Push it until it clicks into place.
3. Close the display and turn the computer over.
4. Fix the ODD bay module with one M2x4 black flat-head screw.