4 Replacement Procedures 4.15 FL Inverter Board
4-54 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
4.15 FL Inverter Board
Removing the FL Inverter Board
Remove the FL inverter board according to the following procedures and Figures 4-37 and 4-38
1. Remove three M2.5x4.5 white flat-head screws.
Figure 4-37 Removing the FL inverter board
2. Raise the LCD module, FL inverter board and disconnect the LCD/FL cable from LCD/FL
connecter.
3. Disconnect the HV cable from HV connecter and remove the FL inverter board.
To Next Page
Loading...
