4 Replacement Procedures 4.1 General
4-16 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
Installing the Memory Card
Install the memory card according to the following procedures and Figure 4-5, after checking that
the computer is turned off in boot mode.
1. Insert the memory card gently until it stops and is seated securely.
2. After checking that the memory card is seated securely.
After the PC card is installed, check the hardware configuration in the Hardware Setup or TSETUP
program to make sure that the PC card in compatible with the current hardware configuration.
To Next Page
Loading...
