4.5 CPU 4 Replacement Procedures
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual 4-31
Installing the CPU
Install the CPU according to the following procedures and Figures 4-15.
1. Check that the triangle on the cam is in the unlocking position.
2. Attach the CPU to the correct position in the CPU socket. Align the CPU with the CPU socket
by using the triangle as a guide.
Figure 4-19 Installing the CPU
CAUTION: Place the CPU by aligning the triangle with the shaded area.
To Next Page
Loading...
