Toshiba Satellite P300 - Page 169

Replacement Procedures
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
4-iv
Figure 4-22 Remove the USB Board............................................................................... 4-47
Figure 4-23 Disconnect the power cable .........................................................................4-48
Figure 4-24 Remove the system board ............................................................................4-51
Figure 4-25 Remove the CPU heat sink ..........................................................................4-51
Figure 4-26 Remove the CPU..........................................................................................4-52
Figure 4-27 Apply silicon grease......................................................................................4-53
Figure 4-28 Remove the display mask.............................................................................4-54
Figure 4-29 Remove the FL inverter ...............................................................................4-55
Figure 4-30 Remove the LCD unit .................................................................................. 4-56
Figure 4-31 Remove the LCD supports...........................................................................4-57
Figure 4-32 Thermal pad on North Bridge ......................................................................4-59
Figure 4-33 Apply silicon grease on North Bridge,VGA,V-RAM..................................4-60
Figure 4-34 Thermal pad & VRAM position…………………………………………...4-60
Figure 4-35 Thermal pad position……………………………………………………...4-61
Figure 4-36 Thermal pad & VRAM position…………………………………………...4-62