Toshiba Satellite P300 - Figure

Replacement Procedures
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
4-iii
Figures
Figure 4-1 Remove the battery pack................................................................................. 4-8
Figure 4-2-1 Install the battery pack.................................................................................... 4-9
Figure 4-3 Remove a PC card......................................................................................... 4-10
Figure 4-2-1 Insert a PC card.............................................................................................4-11
Figure 4-3 Turn the compute upside down ....................................................................4-10
Figure 4-3 Remove the main HDD assembly.................................................................4-14
Figure 4-4 Remove main HDD......................................................................................4-15
Figure 4-4-1 Turn the compute upside down.................................................................... 4-18
Figure 4-4 Remove the second HDD.............................................................................4-19
Figure 4-4 Remove the screws and HDD holder........................................................... 4-20
Figure 4-5 Remove a wireless LAN card ......................................................................4-23
Figure 4-6 Remove a memory slot cover.......................................................................4-26
Figure 4-6-1 Remove a memory module..........................................................................4-27
Figure 4-7 Insert a memory module...............................................................................4-28
Figure 4-8 Remove screws for KB Holder .................................................................... 4-30
Figure 4-9 Remove the keyboard/KB Holder................................................................ 4-31
Figure 4-10 Remove an optical disk drive.......................................................................4-33
Figure 4-11 Disassemble the side bracket .......................................................................4-34
Figure 4-12 Remove the screws (securing display assembly)......................................... 4-35
Figure 4-12-1 Remove the KB screws................................................................................ 4-36
Figure 4-13 Remove the screws(from bottom side) ........................................................4-37
Figure 4-14 Remove the screws(from top side)...............................................................4-37
Figure 4-15 Remove the Wireless Antenna and LCD cable............................................4-38
Figure 4-16 Remove the hinge screws............................................................................. 4-38
Figure 4-17 Remove the LCD harness and remove display assembly ............................ 4-39
Figure 4-18 Remove the Screws(back)............................................................................4-41
Figure 4-19 Disconnect the touch pad flat cable/Fingerprint cable.................................4-42
Figure 4-20 Remove the screws (front) and cover assy...................................................4-43
Figure 4-21 Remove the touch pad..................................................................................4-45