User’s Manual4-18
Operating Basics
Loading discs
To load a disc, follow the steps below and refer to the gures.
1. a. When the power is on, press the eject button to open the drawer slightly.
Pressing the eject button
b. Pressing the eject button will not open the drawer when the disc drive’s
power is off. If the power is off, you can open the drawer by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole just to the right of the eject button.
Manual release with the eject hole
Eject button
To Next Page
Loading...
