1-19
Before Operation - VCR part (Continued)
Setting the clock Manually
The clock in your DVD+VCR controls time and
date settings for your DVD+VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
DVD+VCR detects a channel that broadcasts a
Teletext signal. If the broadcast signal is weak the
clock will not be set and will require setting
manually.
11
Press VCR MENU.
Press
bb
or
BB
to select TIME DATE.
Press
ENTER/OK.
The auto adjust mode can be set to “OFF” by pressing
vv
or
VV
if you want to set the time manually.
Press
ENTER/OK.
22
Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
33
If you make a mistake press
bb
or
BB
and enter the
correct details.
44
Press VCR MENU to return to a TV picture.
To set the colour system
11
Press VCR MENU.
22
The main menu will appear on the TV screen.
33
Press 1 or 2 to select the SYSTEM and press
ENTER/OK.
44
Press 3 or 4 to select according to the COLOUR
system used.
55
Press VCR MENU to remove the menus from the
TV screen.
To set the RF OUT sound system
11
Press VCR MENU.
22
The main menu will appear on the TV screen.
33
Press 1 or 2 to select the SYSTEM and press
ENTER/OK.
44
Press 3 or 4 to select according to the COLOUR
system used.
55
Press 2 to select the RF Out sound system com-
patible to your TV.
66
Press VCR MENU to remove the menus from the
TV screen.
To Next Page
Loading...
Need help?
General
