Toshiba Strata CTX Series - CTX28 Default Program Data Tables (Part 1); Program 313, 100, and 200 GMAU Default Data Tables

CTX28 Installation
CTX28 Default Initialized Data
Strata CTX28 I&M 3/05 1-31
Table 1-22 Program 313 Default Data
Caller
ID
Prog 313 Function CTX28 default
FB1 Caller ID Receive Method
nothing
/ANI-MCI/ANI-Sprint/
CLASS
CLASS
FB2
Caller ID Identification
Notice Contents
ANI and DNIS/
DNIS/DID ANI or DNIS
under line is CTX100’s default
Note Class Equipment number is not required for CTX28 because CLID circuits are built-in and
dedicated to each CO line.
Table 1-23 Program 100 Default Data
Virtual
Slot
Equip.
Nos.
Circuits
PCB
Code
Station Line
Numbers
Connection
0101 8 - Digital Telephones (no spkr OCA) 017 200~207
GMAU1A
(motherboard)
0102 3 - CO lines, with CLID 028 CO1~CO3
0103 Not used
0104 Standard Telephone 01~02 026
01~208
02~217
01-GMAU1A
02-GSTU1A
0105 4 - Voice Mail ports
026
220~223 GVMU1A
0106 Not used
0107 8 - Digital Telephones 017 209~216
GCDU1A
0108 3 - CO Lines with CLID 028 CO4~CO6
0205 Virtual BIOU 020
Relay Contact
Page, MOH
GCTU1A
*Slot codes are set during system initialization and cannot be changed.
Table 1-24 Program 200 Default Data
GMAU
FB0 DN 200 201 202 203 204 205 206 207 208
FB1 EQUIP 010101 010102 010103 010104 010105 010106 010107 010108 010401
FB2 DKT DKT DKT DKT DKT DKT DKT DKT SLT
FB3 Ext. Ext.Ext.Ext.Ext.Ext.Ext.Ext.Ext.
FB19 VM ID 200 201 202 203 204 205 206 207 208
FB22
VM MW
Center
Port
220 220 220 220 220 220 220 220 220