Installation
Step 7: Run the CTX Attendant Console
14 Strata CTX Attendant Console Installation 03/03
2. In the Attendant Logon box (shown right), select
“Admin” from the drop-down list, leave password
blank, click OK.
3. The first time that you install
the CTX Attendant Console,
you may see the window shown
right. Enter the correct IP
Address, Port and Name of each
node. In the Name field, enter
an easily identifiable name,
such as “Local,” “Chicago,”
etc. Then click OK.
The Attendant Console window opens (shown below).The console is now ready for use. Refer
to the Strata CTX Attendant Console User Guide for operating instructions.
6686
6594
To Next Page
Loading...
