Toshiba Strata CTX - Step 1: Obtain License for the Console; Step 2: Program CTX for the Console; Step 2 A: Assign Class of Service (COS) on CTX

Installation
Step 1: Obtain License for the Console
2 Strata CTX Attendant Console Installation 03/03
Step 1: Obtain License for the Console
➤ Be sure to contact Toshiba Telecommunication Systems Division’s (TSD) Customer Service
department to obtain an order number. Use the FYI license key generator to obtain a license for
a single or multiple consoles.
Step 2: Program CTX for the Console
Certain programming assignments are required in the Strata CTX for the CTX Attendant Console;
others are preferred or recommended assignments for proper operation. You can use Strata CTX
WinAdmin or CTX telephone button programming.
Step 2A: Assign Class of Service (COS) on CTX
➤ Enter Program 103, then use the following Feature Buttons (FBs) to make the following
assignments:
6442
Use COS 10 for Attendant
Disable
(Don’t check
01, 06, 10)
Prefer enabled (check 09, 12~17, 20, 21, 23, 26, 30).
Other FBs: set according to site preferences.
Disable
(Don’t check 38)
Enable
(Check 24, 25, 27)
Required