Toshiba SUPER MMY-MAP0501T8

Other manuals for Toshiba SUPER MMY-MAP0501T8

Questions and Answers

D
Dr. Jason WeaverAug 13, 2025
What does error E16 mean on my Toshiba Heat Pump?
- K
  Kathleen BowenAug 13, 2025
  If your Toshiba Heat Pump displays error code E16, this indicates either a capacity overload (00) or an issue with the number of connected units (01~).
P
petersonashleyAug 16, 2025
What does error E20 mean on a Toshiba Heat Pump?
- N
  nhollandAug 16, 2025
  Error code E20 on your Toshiba Heat Pump indicates that another line is connected during automatic addressing. This could mean either another outdoor line (01) or another indoor line (02) is connected.
C
Carolyn WilsonAug 19, 2025
What does error E19 mean on my Toshiba Heat Pump?
- R
  Robert PhamAug 19, 2025
  Error code E19 on your Toshiba Heat Pump indicates an issue with the header outdoor units. Specifically, it could mean that there is no header unit (00) or that there are two or more header units (02).
E
Eric LeeAug 25, 2025
What does it mean if my Toshiba Heat Pump shows error code E06?
- P
  Paul JacobsAug 25, 2025
  If you see error code E06 on your Toshiba Heat Pump, it indicates a decrease in the number of indoor units that are normally received.
K
kathryn01Aug 27, 2025
What does error code E23 mean for a Toshiba Heat Pump?
- G
  george43Aug 28, 2025
  If your Toshiba Heat Pump is showing error code E23, it indicates a sending error between the outdoor units during communication.
M
matthew97Aug 31, 2025
What does it mean when my Toshiba Heat Pump displays error code E25?
- J
  Jennifer WalkerAug 31, 2025
  If your Toshiba Heat Pump displays error code E25, it means there is a duplicated follower outdoor address setup.
J
jmeyersSep 4, 2025
What does error code E26 signify on a Toshiba Heat Pump?
- C
  Cheryl SmithSep 4, 2025
  If your Toshiba Heat Pump shows error code E26, it indicates a decrease in the number of outdoor units that are normally received.
M
Matthew OsborneSep 7, 2025
What does error E28 mean on my Toshiba Heat Pump?
- J
  Joshua GainesSep 7, 2025
  If your Toshiba Heat Pump displays error code E28, it indicates an error with the follower outdoor unit. The error code will show the detected outdoor unit number.