EasyManua.ls Logo

Toshiba SureMark 4610 2CR User Manual

Toshiba SureMark 4610 2CR
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Toshiba Global Commerce Solutions
SureMark 4610 Printers
Hardware Guide
Models 2CR and 2NR
TC62-0012-01

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Toshiba SureMark 4610 2CR and is the answer not in the manual?

Toshiba SureMark 4610 2CR Specifications

General IconGeneral
BrandToshiba
ModelSureMark 4610 2CR
CategoryLabel Maker
LanguageEnglish

Summary

Chapter 1. Introducing the SureMark 4610 Models 2CR and 2NR Printers

Features and Specifications

Key features of the 2CR and 2NR models, including print speed, paper loading, sensors, and memory.

Communication and Power Options

Details on interface cards (USB, RS-485, RS-232, Ethernet, WiFi) and their power sources for connectivity.

Network Interface Adapter Prerequisites

Requirements for Ethernet and WiFi adapters, including printer manufacturing date and firmware level.

Operating System Requirements

Compatibility of the printer with various operating systems and driver/API options.

Hardware Requirements

List of systems and configurations compatible with SureMark printers.

Identifying Controls and Indicators

Information on printer controls, buttons, and LED indicators for status monitoring.

Locating the Power Button

Location of the printer's power button under the paper door.

Understanding Light-Path LEDs

Explanation of diagnostic LEDs that indicate potential printer problems.

Calling for Service

Information on what details to have ready when calling for warranty or service.

Chapter 2. Product Specifications

Physical Dimensions

Detailed measurements of the SureMark 4610 Models 2CR and 2NR printers.

Temperature and Humidity Limits

Operating and storage environmental limits for printer performance and durability.

Chapter 3. Installing and Configuring the 4610 Printer

Before You Begin Installation

Initial steps and safety information before installing the SureMark printer.

Verify Your Order

Checklist of components that should be included with the printer order.

Understanding Your Configuration

Explanation of integrated vs. distributed printer setup configurations.

Installing the Interface Card

Step-by-step guide for installing various interface cards (RS-232, USB, Ethernet, WiFi).

Installing the Fillers

Guidance on installing fillers for proper printer positioning within the system unit.

Configuring a WiFi Adapter

Setup instructions for the 4610 WiFi Interface Adapter, including network connection.

Printing the Test/Status Receipt

Procedure to print a receipt containing essential setup information and printer status.

Connecting to the Printer Access Point (AP)

Steps to connect a computer to the printer's WiFi Access Point for setup.

Logging into WiFi Configuration Interface

Accessing the printer's web interface to perform WiFi setup and management.

Setting up the WiFi Client

Procedure for configuring the WiFi client to connect to a target network.

Setting WiFi IP Parameters

Configuring IP addresses for the WiFi adapter, either via DHCP or manually.

Configuring a Network Printer (WiFi/Ethernet)

Guidance for setting up printers with WiFi or Ethernet adapters for network access.

Setting Printer IP Parameters

Manual configuration of IP settings for the printer via its web interface.

Changing Default Passwords

Steps to secure the printer by changing default web interface and access point passwords.

Chapter 4. Using and Maintaining the 4610 Printer

Replenishing Consumable Supplies

Information on paper rolls, inserted forms, and ribbon cartridges.

Loading and Replacing Paper Roll

Instructions for correctly installing a new paper roll into the printer.

Supported Paper Types

Specifications for thermal and impact paper required for the 4610 printer.

Thermal Paper Specifications

Detailed requirements for thermal paper, including width, diameter, and thickness.

Impact Printing Specifications

Specifications for single and multi-part forms used in impact printing.

Supported Documents That Are Flipped

Specifications for documents that can be flipped during printing.

Loading Large Paper Rolls

Information on using extra large paper rolls and necessary mounting hardware.

Replacing the Ribbon

Step-by-step instructions for replacing the printer's ribbon cartridge.

Supported Ribbon Types

Details on the stuffer-box ribbon type required and compatible alternatives.

Inserting Checks (Model 2CR Only)

Procedure for correctly inserting checks for MICR reading and printing.

Inserting Documents from the Side

Instructions for inserting documents into the side of the printer.

Retrieving Printer Statistics

How to access and interpret printer usage and performance statistics.

Cleaning Recommendations

General guidelines for cleaning the printer's exterior and internal components.

Cleaning the MICR Read Head (Model 2CR Only)

Procedure for cleaning the MICR read head using isopropyl alcohol.

Cleaning the Thermal Printhead

Instructions for cleaning the thermal printhead to maintain print quality.

Clearing Jams in the Check Flipper Area

Steps to remove jammed checks or documents from the check flipper mechanism.

Notices

Telecommunication Regulatory Statement

Statement regarding product connection to public telecommunication networks.

Electronic Emission Notices

Guidelines for attaching monitors and using interference suppression devices.

Federal Communications Commission (FCC) Statement

FCC compliance information for Class A digital devices and potential interference.

Industry Canada Class A Emission Compliance

Compliance statement for Class A digital apparatus with Canadian standards.

European Union EMC Directive Conformance

Statement of conformity with EU directives on electromagnetic compatibility.

Germany Class A Statement

German compliance statement for Class A devices regarding EMC.

Australia and New Zealand Class A Statement

Compliance statement for Class A products in Australia and New Zealand.

Electrostatic Discharge (ESD) Prevention

Information on preventing damage from electrostatic discharge during service.

Product Recycling and Disposal

Guidelines for responsible recycling and disposal of IT equipment.

Battery Safety Information

Warnings and precautions related to the battery, including explosion risk.

Battery Return Program

Information on battery types, recycling, and return programs.

Trademarks

List of registered trademarks associated with Toshiba and other companies.

Related product manuals