Need help?Do you have a question about the Toshiba B-EX Series and is the answer not in the manual?
General| Print Technology | Thermal Transfer |
|---|---|
| Max Print Width | 4.09 inches |
| Max Print Length | Up to 1498 mm |
| Media Type | Labels, tags, and tickets |
| Connectivity | USB, Ethernet |
| Optional Interfaces | Wireless LAN, Bluetooth |
| Operating System Compatibility | Windows, Linux |
| Label Length | Up to 1498 mm |
| Supported Barcode Types | 1D and 2D barcodes |
Mode mainly used by users for issuing labels and error handling.
Mode for self-diagnosis, parameter setting, and adjustment by technicians.
Mode for users to adjust settings like LAN/WLAN and auto-calibration.
Mode used to download boot and main programs firmware.
Mode used to automatically update printer firmware from USB memory.
Describes functions of keys like FEED, RESTART, PAUSE, MODE, CANCEL, UP, DOWN, LEFT, RIGHT.
Explains the meaning and behavior of ONLINE and ERROR LEDs.
Describes the type, size, and structure of the printer's LCD.
Explains how help messages are displayed and navigated.
Explains the purpose and process of manually setting the print threshold.
Explains the function of RFID calibration for optimizing read/write positions and AGC values.
Explains the information mode for displaying and printing feed amounts.
Explains how to cancel print jobs using the CANCEL key.
Explains LCD messages and LED indications for printer status and errors.
Explains the list box structure and scrollbar functionality for menu navigation.
Describes how to enter and the purpose of the system mode for self-testing and settings.
Outlines the DIAG menu, including maintenance counter and diagnostics.
Contains settings related to media handling, ribbon, cutting, and speed.
Allows setting print conditions like issue count and speed for test prints.
Displays ambient and print head temperatures, updated periodically.
Explains registering the reflective sensor level for print area detection.
Explains registering the transmissive sensor level for label gap detection.
Activates the head-up solenoid for a duration of 10 seconds.
Performs tests on the printer's panel, including backlight and display.
Performs RFID read tests and displays information related to tag reading.
Displays and allows setting of RFID module type, country, tag, and RF channel.
Configures retry parameters for RFID operations like adjustment, issue, read, and write.
Resets the printer, similar to system mode reset.
Allows setting of printer parameters, mirroring system mode settings.
Provides access to various printer adjustment settings like feed, cut, and tone.
Configuration for LAN and WLAN network settings.
Controls print job parameters like sensor, mode, print speed, and ribbon.
Describes the auto configuration mode for automatically downloading firmware.
Details the necessary preparation of firmware and CFG files on USB memory.
To Next Page
