T3400, T3400CT
3. Bad track FORMAT
This option formats a specified cylinder and track as a bad track. If a bad track is
detected, use this option to label it as a bad track.
4. Bad track CHECK
This option searches for bad tracks by reading data to all tracks. A list of bad
tracks is displayed when the program is complete. If an error other than a bad
track is detected, the program is terminated.
3.16.2 Operations
CAUTION: The hard disk will be erased when this program is executed. Before
executing, transfer the contents of the hard disk onto a backup system. This can be
done with the Toshiba MS-DOS BACKUP command. See the Toshiba MS-DOS manual
for details on using the BACKUP command.
Select 2 from the DIAGNOSTIC MENU and press ENTER to display the following menu:
DIAGNOSTICS - HARD DISK FORMAT : VX.XX
1 - All track FORMAT
2 - Good track FORMAT
3 - Bad track FORMAT
4 - Bad track CHECK
9 - Go to Test MENU
↑ ↓ → ← : Select items, Enter: Finish, Esc: Exit
1. All track FORMAT
Press 1 to select “All track FORMAT,” and format the entire disk.
[All track FORMAT]
Drive : #1 = HDD #2 = Non
Cylinder : XXXX
Head : XX
Sector : XX
<<< Model name = >>>
To Next Page
Loading...
