T3400, T3400CT
Installation
To install the LED board, follow the steps below and refer to Figure 4-21.
1. Seat the LED board (Figure 4-21).
2. Seat the LED holder on the LED board and press gently to secure the latches
(Figure 4-21).
3. Secure the M2.5x4 brass screw holding the LED board and LED holder (Figure
4-21).
4. Replace the top cover, optional PCMCIA card, optional memory card, and battery
pack as described in sections 4.5 through 4.2.
To Next Page
Loading...
