8
Coil internal volume
(inch
3
)
Number of
circuits
by U-Pipe
diameter
Distributor Orifice size
(ID inch)
Design evaporating temperature
Evaporator air suction temp.
Design condensing temperature
Condenser air suction temp.
Cooling ”Air ON” temperature
(*1)
Heating ”Air ON” temperature
(*1)
(*1) Operating Conditions:
The DX interface is not designed to be used directly with outside air. It must be used in conjunction with
either heat recovery exchanger or pre-conditioning heaters / coolers to ensure that the DX-Coil Air On
limits are not exceeded and in order to ensure reliable operation:-
Coil Air (After Heat Recovery Exchanger)
Cooling mode DX coil “Air ON” temp: Min: 59°FWB (64°FDB) ~ Max: 75°FWB (95°FDB)
Heating mode DX coil “Air on” temp: Min: 59°FDB ~ Max: 83°FDB
Refer to specification of Outdoor Unit