Need help?Do you have a question about the Toshiba TE2 Series and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | TE2 Series |
| Category | Controller |
| Language | English |
Overview of the TE2 Series soft starter and its control capabilities.
Covers overload, phase loss, and current imbalance protection features.
Lists key electrical/mechanical specifications, ratings, and approvals.
Details TE2 Series models, current ranges, and selection criteria.
Instructions for unit inspection, location selection, and initial checks.
Critical safety notices, lockout procedures, and mounting clearances for proper operation.
Information on connecting power conductors to the unit's bus tabs.
Details power terminal specs, wire ranges, and remote keypad mounting.
Provides physical dimensions and weight for TE2 Series models.
Explains the built-in thermal overload protection feature.
Covers overload reset options and NEMA trip curve variations.
Visual representation of the TE2 Series Overload Trip Curves.
Instructions for power connections, safety warnings, capacitor placement, and grounding.
Guidance on testing, lightning protection, and control terminal overview.
Details AC control power supply needs and transformer sizing.
Wiring for 3-wire, 2-wire/PLC control, and safety for control circuits.
Connecting external interlocks and enabling Dual Ramp/Jog features.
Configuring analog output, fault signals, and auxiliary relays.
Describes the digital interface, display modes, Program Mode entry, and value modification.
How to manage password protection and modify function values.
How to view fault codes, history, and perform resets.
Introduces the comprehensive list of TE2 Series programmable functions.
Details motor, starting, jog, kick start, deceleration, and restart functions.
Functions for voltage, current, and ground fault protection.
Covers lockout timers, output relays, serial communications, and system settings.
Details fault history, phase protection, motor power, and power factor protection settings.
Detailed descriptions of functions related to motor FLA, Service Factor, and Overload Class.
Details starting, jog, kick start, deceleration, and restart functions.
Functions for voltage, current, and ground fault protection.
Covers lockout timers, output relays, serial communications, and system settings.
Details fault history, phase protection, motor power, and power factor protection settings.
Outlines the startup process, factory presets, and essential checks before powering on.
Describes the expected operational sequence during start, acceleration, and stopping.
Explains fault codes, their display, numeric codes, and how to interpret fault history.
Provides probable causes and solutions for various fault codes.
Explains the four types of starting ramp profiles and their application.
Discusses the use of Pump-Flex Decel for preventing water hammer in pump systems.
Instructions for setting up and managing password protection for parameter lock.
Discusses applications requiring external overload relays for higher protection or multiple motors.
A template for recording changes made to factory default settings.
To Next Page
