TE2 Series Digital Solid State Soft Starter User Manual 57 | Page
When F071 = 2, the values of all functions will be reset to the
factory default settings. Use this feature when setting conflicts have
occurred or parameters have been tampered with. The Fault History
is also cleared with this function.
Note:
This will not reset F070 = Parameter Lock / User Password. See
Appendix 3 for resetting this feature.
F072 = Reserved
F073 = Unit Frame Rating:
Read Only. Reserved for Factory Use.
F074 = CT Ratio:
Read Only. Primary value of the TE2 Series internal Current
Transformers (CTs) for use in determining the GF trip settings
(F046). CTs cannot be used for external metering. Alteration is
reserved for factory use only.
5.6.12.a Real Time Clock Settings
Functions F075 through F080 set the system real time clock.
The time clock is used for date/time stamping of the Fault History.
The clock automatically adjusts for leap years and is backed up by
a Lithium ion battery for long life.
Note:
The time clock does not automatically adjust for daylight savings
time.
F075 = Year
Factory Setting = Year of manufacture
Range = 2000 to 2047
F076 = Month
Factory Setting = Month of manufacture
Range = 1 - 12
F077 = Day
Factory Setting = Day of manufacture
Range = 1 - 31
F078 = Hour
Factory Setting = Actual (EST)
Range = 0 - 23 (12:00 midnight is hour 0)
F079 = Minute
Factory Setting = Actual (EST)
Range = 0 - 59
F080 = Second
Factory Setting = Actual (EST)
Range = 0 - 59
F081 = Firmware revision number for Factory Use
F082 -F084 = Reserved
To Next Page
Loading...
