Names of each part on the main unit
Back
Front
(10)
(11)
(9)
(8)
(8)
(13)
(6)
(1)(4)
(3)
(2)
(5)
(7)
(12)
(14) (15)
  Name  : Function
(1)  Lens  : Projects expanded image. 
(2)  Infrared remote sensor  : Senses commands from the remote control. 
(3)  Foot adjuster release button  : Press to set up or stow the foot adjuster. 
(4)  Air exhaust  : Expels air that has grown hot inside the projector.
(5)  Control panel  : Operates the projector. 
(6)  Zooming lever  : Adjusts screen size. 
(7)  Focusing ring  : Adjusts screen focus. 
(8)  Air intake  : Draws in air from outside the projector.
(9)  AC IN socket  : Connect the supplied power cord here.
(
10
)  Rear panel  : Connects external devices. 
(
11
)  Antitheft lock hole  : Attach a safety cable or any other antitheft device.
(
12
)  Speaker  : Outputs audio sound.
(
13
)  Tilt adjuster  : Adjusts the projector’s horizontal tilt. 
(
14
)  Lamp cover  : Remove to replace lamp. 
(
15
)  Foot adjuster  : Adjusts the vertical projection angle.