Toshiba TDP TDP-T9 - Control Panel and Remote Components; Panel and Remote Identification

17
Preparations
Names of each part on the control panel and remote control
Control panel Remote Control
Name : Main Function
Control panel
(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus.
p.32
(3) KEYSTONE button : Adjusts keystone distortion.
(4) ON/STANDBY button : Turns the power on/off (standby).
p.26
(5) INPUT button : Selects input.
p.27
(6) Selection button : Menu selections and adjustments.
p.32
(7) LAMP indicator : Displays lamp mode.
p.26
(8) POWER indicator : Displays power on/off mode.
p.26
(9) TEMP indicator : Lights when internal temperature too high.
p.41
Remote control
(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus.
p.32
(3) KEYSTONE button : Adjusts keystone distortion.
(4) ON/STANDBY button : Turns the power on/off (standby).
p.26
(5) INPUT button : Selects input.
p.27
(6) Selection button : Menu selections and adjustments.
p.32
( 10 ) LASER button : Shows a laser pointer.
( 11 ) AUTO SET button : Sets up analog input from computer.
(1)
(2)
(3)
(4)
(5)
(6)
(9)
(8)
(7)
POWER
KEYSTONE +
KEYSTONE -
(3)
CAUTION
• Do not look into the laser light
source of the remote control or
direct the laser pointer toward a
person or a mirror.
• Handling and adjusting other
than described here may lead to
dangerous exposure to laser.
Remote control
transmitter
Laser light
source
(
12
)
(
11
)
(
5
)
(
2
)
(
6
)
(
18
)
(
14
) (
14
)
(
1
)
(
4
)
(
10
)
(
15
)
(
16
)
(
13
)
(
3
)
(
19
)
Warning
label
Battery
cover
(
17
)