User’s Manual
4-22
O
PERATING
B
ASICS
2. The Region Selection icon will appear in the Windows Task Bar.
Figure 4-9 The Region Selection icon (Windows XP)
3. Click the icon with the primary mouse button to display a list of regions that
the modem supports. A sub menu for telephony location information will
also be displayed. A check will appear next to the currently selected region
and telephony location.
4. Select a region from the region menu or a telephony location from the sub-
menu.
• When you click a region it becomes the modem’s region selection, and
the New Location for telephony will be set automatically.
• When you select a telephony location, the corresponding region is auto-
matically selected and it becomes the modem’s current region setting.
Properties menu
Click the icon with the secondary mouse button to display the following menu.
Figure 4-10 The menu list (Windows XP)
Setting
You can enable or disable the following settings:
AutoRun Mode
The Region Select utility starts automatically when you start up the operat-
ing system.
Open the Dialing Properties dialog box after selecting region.
To Next Page
Loading...
