8-15
Television
O
PTIONAL
D
EVICES
Television
A television can be connected to the video out port on the computer. To connect a
television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video out
port.
Figure 8-10 Connecting a television
3. Turn the television on.
4. Turn the computer on.
i.LINK (IEEE1394)
Some models are equipped with a i.LINK.
i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible
devices such as
1. Digital video cameras
2. Hard disk drives
3. MO drives
4. CD-RW drives
CAUTION: i.LINK uses a four-pin connector, which does not carry elec-
triccurrent. External devices will need their own power supply.
To Next Page
Loading...
