User’s Manual
7-8
HW S
ETUP
AND
P
ASSWORDS
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in standby mode, you can turn
on the computer by pressing any key. It is effective only for the internal keyboard
and only when the computer is in standby mode.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse and key-
board by setting the
USB KB/Mouse Legacy Emulation
item to
Enabled
.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
LAN
Wake-up on LAN
This features lets the computer’s power be turned on when it receives a wake-up
signal from the LAN.
CAUTION: Do not install or remove an optional memory module while
Wake-up on LAN is enabled.
NOTE: Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
Built-in LAN
Enabled
Enables Wake-up on Keyboard.
Disabled
Disables Wake-up on Keyboard. (Default)
Enabled
Enables the USB KB/Mouse Legacy Emulation.
(Default)
Disabled
Disables the USB KB/Mouse Legacy Emulation.
Enabled
Enables the USB-FDD Legacy Emulation. (Default)
Disabled
Disables the USB-FDD Legacy Emulation.
Enabled
Enables Wake-up on LAN.
Disabled
Wake-up on LAN. (Default)
Enabled
Enables built-in LAN functions. (Default)
Disabled
Disables built-in LAN functions.
To Next Page
Loading...
