EasyManuals Logo

Toshiba TECRA C50-C Series User Manual

Toshiba TECRA C50-C Series
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Hardware If you cannot find a software problem, you should
then check the setup and configuration of your
hardware. First run through the items in the
preliminary checklist as described previously
then, if you still cannot correct the problem, try to
identify the source. The next section provides
checklists for individual components and
peripherals.
Before using a peripheral device or application software that is not an
authorized TOSHIBA part or product, make sure that the device or software
can be used with your computer. Use of incompatible devices might cause
injury or might damage your computer.
If something goes wrong
Your computer does not respond to the keyboard commands
If an error occurs and the computer does not respond to your keyboard
commands, do the following:
Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait 10-15 seconds before turning on the
power again by pressing the power button.
Your program stops responding
If you are working with a program that suddenly freezes all operations,
chances are the program has stopped responding. You can exit the failed
program without shutting down the operating system or closing other
programs.
To close a program that has stopped responding:
1. Press CTRL, ALT, and DEL simultaneously (once), then click Start
Task Manager. The Windows Task Manager window appears.
2. Click the Applications tab. If a program has stopped responding, the
words "not responding" appear beside its name in the list.
3. Select the program you want to close, then click End Task. Closing
the failed program should allow you to continue working. If it does not,
continue with the next step.
4. Close the remaining programs one by one by selecting the program
name, then End Task. Closing all programs should allow you to
continue working. If it does not, power off your computer and then
restart it.
The computer does not start
Make sure that you attached the AC adaptor and power cord/cable
properly.
User's Manual
6-3

Table of Contents

Other manuals for Toshiba TECRA C50-C Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba TECRA C50-C Series and is the answer not in the manual?

Toshiba TECRA C50-C Series Specifications

General IconGeneral
CPUIntel Core i3/i5/i7
ProcessorIntel Core i3/i5/i7
RAMUp to 16GB DDR3L
StorageUp to 500GB HDD, Up to 256GB SSD
Display15.6" HD or FHD (1920 x 1080)
GraphicsIntel HD Graphics
Operating SystemWindows 10 Pro
PortsUSB 3.0, USB 2.0, HDMI, VGA, Ethernet, SD card reader, headphone/microphone combo jack
Weight2.3 kg (5.07 lbs)

Related product manuals