Toshiba Thunderbolt 3 Dock - Audio Playback and Recording Configuration; Configuring Audio Playback Ports; Configuring Audio Recording Ports

EN-22 User’s Manual
Toshiba Thunderbolt™ 3 Dock
Configuring audio playback ports (Headphone)
1. Right-click the speaker icon in Windows taskbar.
(Sample Image) Speaker icon
2. Select Playback devices from the menu.
3. On the Playback tab of the dialog box, select one of the following:
■ A Realtek High Definition Audio device—to use the Headphone
jack or Headphone/Microphone combo port of the connected
computer (The Realtek High Definition Audio is provided with some
computers.)
■ A Thunderbolt 3 Dock Audio device—to use the Headphone/
Microphone combo port of the dock
4. Click Set Default.
5. Click OK.
6. Connect your playback device to the port you enabled in step 3.
Configuring audio recording ports (Microphone)
1. Right-click the speaker icon in Windows taskbar.
2. Select Recording devices from the menu.
3. On the Recording tab of the dialog box, select one of the following:
■ A Realtek High Definition Audio device—to use the Microphone
jack or Headphone/Microphone combo port of the connected
computer
■ A Thunderbolt 3 Dock Audio device—to use the Headphone/
Microphone combo port of the dock
4. Click Set Default.
5. Click OK.
6. Connect your recording device to the port you enabled in step 3.
If the speaker icon is not visible in Windows taskbar, select Start ->
Windows System -> Control Panel -> Hardware and Sound -> Sound.
NOTE
There might be other Audio devices listed in the menu depending on the
model of your computer.
NOTE