Toshiba TOSDIC-CIE DS Programming Manual

1.Outline
1
1. Outline
1.1. The whole outline
type1 light communicates with OIS-DS/SMART or PLCS (PLC connection function) by
using a PCMP interface.
PLC connection function uses D register.
TAG lay out
INDp0001.PV
PFIp0001.PV
SETp0001.PV
SETp0001.FBSV
SETp0001.SV
PB2p0001.FIO
PB2p0001.RFO
PB4p0001.FIO
PB4p0001.RFO
PB8p0001.FIO
PB8p0001.RFO
data collection
request
write request
from PLC connection
Function
:This part is decided according to engineering
Input(collect) data area:Register the configuration of the PLC (Max 960
word),Regist TAG
Setting data area :Register the configuration of the PLC (Max 480 word)
Output data area:Regist TAG
:TAG lay out
:proccess or data flow
(4)
(3)
(1)
type1 light
D register
Input(collection)
data area
Setting
data area
control by Ladder program
(5)
(5)
(2)
PCMP
Ladder Program
Figure1.1. Whole outline when type1 light is connected

Toshiba TOSDIC-CIE DS Specifications

General

Brand	Toshiba
Model	TOSDIC-CIE DS
Category	Control Systems
Language	English