Toshiba TOSVERT VFS15-4037PL-W User Manual

E6581611
D-6
4
4.2.2 Settings in the Standard setting mode
The inverter enters this mode by pressing the MODE key when the Standard setting mode is selected.
 How to set basic parameters
(1) Select parameter to be changed. (Turn the setting dial.)
(2) Read the programmed parameter setting. (Press the center of
the setting dial.)
(3) Change the parameter value. (Turn the setting dial.)
● To switch to the Easy setting mode, press the EASY key in the Standard monitor mode. easy is displayed, and
the mode is switched.
When you are unsure of something
during operation:
You can return to the Standard monitor
mode by pressing the MODE key
several times.




 
  
⇔

 
  
 
⇔

y
Standard parameters
*
MODE
MODE
MODE
MODE
Standard monitor mode
* Parameter title and the setting
value are displayed alternately
(1)
(3)
(2)
(4)
*
(5)
(7)
(6)
(8)
(9) (10)
Basic parameter setting
Extended parameter setting
(4) Press this key to save the parameter value.
(Press the center of the setting dial.)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Toshiba TOSVERT VFS15-4037PL-W Specifications

General

Brand	Toshiba
Model	TOSVERT VFS15-4037PL-W
Category	Inverter
Language	English