Toshiba V Series - 1.5 Specifications of the DN311

20 TC-net 100 Installation and Wiring Manual
Chapter 4 Installation and Wiring of TC-net 100 Parts
4
Example of Connection
Caution
• Place a dust cover on the unused connectors (MT-RJ connectors), and connect nothing to
them.
• In stacking optical shared hub units, do not place them in close contact with one another, but
leave a clearance of about 5 cm between them.
ὈὌἡἤ ἺὌἡἥ ἺὌἡἦ ἺὌἡἧ ἺὌἡἨ ἺὌἡἩ ἺὌἡἪ ἺὌἡἫ ἺὌἡἬ ὁἹὂὈ
ὁὈἡ὆Ἶ֯ ᾌᾚᾊᾒౡم ᾞόᾄᾜᾰᾌᾂᾖ
ᾰ
оᾏᾕᾂᾎᾀᾯ₺
ᾥᾎᾰ὿ᾩᾌᾚᾊᾒ
ౡ
ὉὈὄ ᾋᾂ ᾞᾰ
ᾫ
὇ὨὕὗὟὝὢὛ
ὃὉὈ
Ἵὂ
὇ὨὕὗὟὝὢὛ
ὃὉὈ
Ἵὂ
὇ὨὕὗὟὝὢὛ
ὃὉὈ
Ἡἤ ᾝᾱᾯᾃᾯᾞὼᾛᾂᾫₑₙ֯ ᾌᾚᾊᾒౡ
ᾏ ᾒᾁ ᾉᾯ ᾊᾰᾋ ᾂ ᾞ ᾰᾫ
ᾥᾎᾰ὿ᾩᾌᾚᾊᾒౡ ὉὈὄ ᾊᾭᾏᾋᾂᾞᾰᾫ
ἵἣἶ Ҭ ὇ὂὁὄ ᾋᾂᾞᾰᾫ
ᾥᾎᾰ὿ᾩᾌᾚᾊᾒౡ ὉὈὄ ᾋᾂᾞᾰᾫ
ᾤᾯᾕᾗᾯᾏ෕ ὄἷ⁆ৠ₰⃁₪ভϞ஍
ὉὈὂἼἦἥἵ
ὉὈὂἼἦἥἵὉὈὂἼἦἥἵ
ὉὈὂἼἦἥἵ ὉὈὂἼἦἥἶ
ὉὈὂἼἦἥἶὉὈὂἼἦἥἶ
ὉὈὂἼἦἥἶ
ὉὈὂἼἦἦ
ὉὈὂἼἦἦὉὈὂἼἦἦ
ὉὈὂἼἦἦ ὉὈὂἼἦἦ
ὉὈὂἼἦἦὉὈὂἼἦἦ
ὉὈὂἼἦἦ
ὉὈὂἼἦἦ
ὉὈὂἼἦἦὉὈὂἼἦἦ
ὉὈὂἼἦἦ
ὉὈὂἼἦἦ
ὉὈὂἼἦἦὉὈὂἼἦἦ
ὉὈὂἼἦἦ
ἦἤὗὡ
ὡὕὬἥἤἤὡ ὡὕὬἦὟὡ
ὁὕὬἧὡ
ὡὕὬἥἤἤὡ
ἸὉἵὀ
ὈὌἡἤ ἺὌἡἥ ἺὌἡἦ ἺὌἡἧ ἺὌἡἨ ἺὌἡἩ ἺὌἡἪ ἺὌἡἫ ἺὌἡἬ ἸὉἵὀ
ὈὌἡἤ ἺὌἡἥ ἺὌἡἦ ἺὌἡἧ ἺὌἡἨ ἺὌἡἩ ἺὌἡἪ ἺὌἡἫ ἺὌἡἬ
ὈὌἡἤ ἺὌἡἥ ἺὌἡἦ ἺὌἡἧ ἺὌἡἨ ἺὌἡἩ ἺὌἡἪ ἺὌἡἫ ἺὌἡἬ
ὈὌἡἤ ἺὌἡἥ ἺὌἡἦ ἺὌἡἧ ἺὌἡἨ ἺὌἡἩ ἺὌἡἪ ἺὌἡἫ ἺὌἡἬ ὈὌἡἤ ἺὌἡἥ ἺὌἡἦ ἺὌἡἧ ἺὌἡἨ ἺὌἡἩ ἺὌἡἪ ἺὌἡἫ ἺὌἡἬ
὇ὨὕὗὟὝὢὛ
ὃὉὈ
Ἵὂ
὇ὨὕὗὟὝὢὛ
ὃὉὈ
Ἵὂ
὇ὨὕὗὟὝὢὛ
ὃὉὈ
UTP cable with modular connector
Connectable to only one personal computer
for maintenance
UTP cross cable with modular connector
(SNMP cable) between lines A and B
UTP cable with
modular connector
Optical fiber cord with MT-RJ
connector to each station
Stacking cable with 50-pin Amphenol
comb connector