Display Screen: Users can check the status of the battery capacity. Error
Code, Electrolysis, etc.
Voice button: Short press the button lightly to turn on or off the voice.
Electrolysis: Short press the button to start electrolysis after powering on, it will
take about 32 seconds for a complete electrolysis process (from 0% to 100%).
*** Electrolysed water refers to that is produced by the electrolysis of ordinary
tap water containing dissolved sodium chloride. The electrolysis of such salt
solutions produces a solution of hypochlorous acid and sodium hydroxide. The
resulting water can be used as a disinfectant.
Eco Mode: Short press the button to enter into Eco Mode .When H1 is in Max
Mode, it sprays water and washes For a longer time.
Max Mode: Press the button to enter into Max Mode when H1 is in Auto Mode
or in Eco-Mode.
H1 will enter into the Auto Mode automatically from Max Mode in 6 minutes.
H1 will not enter into the Max Mode if the battery capacity is lower than 20%.
Self-Cleaning: When the battery capacity is higher than 20%, put H1 back on
the charging station, press the button, H1 will start electrolysis first, after that, it
will enter into Self-Cleaning Mode automatically, the entire cleaning time will
last about 80 seconds. If the battery capacity is lower than 20%, users need to
charge H1 first.
H1 can work in self-cleaning mode only when H1 is on the charging station
and connected to the power supply with more than 20% battery.
Child Lock: Hold and press the "Max" Mode button and "Eco" Mode button for
3 seconds, H1 will say "Child Lock is on".
H1 will say "Switch off Child Lock before use" when pressing the function keys in
Child Lock Mode.
How to switch off Child Lock:
① Hold and press the "Max" Mode button and "Eco" Mode button for
3seconds again to switch off the Child Lock.
② Unplug the power source to switch off the Child Lock.
③ Take H1 out from the charging station to switch off the Child Lock.
H1 will say "Child Lock is off" after the above actions are done.
Dirt Monitoring Indicator: The indicator will change from blue to red according
to the dirt amount. If there is too much dirt on the floor or on the dirt detection
sensor, the indicator strip will be longer in Red than in Blue; if there is less dirt on
the floor/dirt detection sensor, the indicator strip will be longer in Blue than in
Red.
ENGLISH 13
To Next Page
Loading...