Need help?Do you have a question about the Toslon X-Pilot and is the answer not in the manual?
Instructions for connecting the CCU box to the bait boat, detailing port configurations.
Guide on initiating autopilot mode and returning the boat to the HOME point.
Procedure for saving current boat location as a waypoint in the system memory.
Tests the boat's motor and rudder functions to ensure correct operation with the X-Pilot.
Allows selection of different radio channels to avoid interference between multiple users.
Adjusts the boat's sensitivity for steering straight, based on boat weight and flexibility.
Calibrates the compass for accurate direction readings, recommended after installation or relocation.
Verifies the proper functioning of the compass system.
Configuration options for boat type, channel reversal, speed limits, and development mode.
General| Type | Autopilot System |
|---|---|
| GPS | Yes |
| Routes | Yes, multiple routes can be saved |
| Screen Type | LCD display |
| Storage Temperature | -20°C to +60°C |
| Humidity | 95% non-condensing |
To Next Page
