Tosok CAG2000 - Page 13

11
 Hold measured value mode
The measured value is held, except when the mastering result is NG.
(1) The bargraph display is usually in the measure mode and shows the value being
measured (this is called the free run condition). In the free run condition, the
measured value is indicated by green (light) on the bargraph display when it is OK
and by red (light) on the bargraph display when it is NG.
(2) Press in the free run condition to hold the measured value (this is called the
hold condition). In the hold condition, the measured value is indicated by green
(dark) on the bargraph display when it is OK and by red (dark) on the bargraph
display when it is NG.
(3) Press to clear the measured value hold.