2
3. Main Modes
The instrument operates in the following four main modes:
(1) Measure mode
Measure (in free run condition): Measures a work.
Hold measured value: Holds the measured value, except when the
mastering result is NG.
(2) Set mode
Enters and changes the set value.
(3) Master mode
Master: Calibrates the instrument with the masters. This
instrument is a comparative measuring instrument.
Be sure to use it upon completion of the mastering
operation.
Adjust detector: Adjusts the detector.
Clear mastering data: Clears the mastering data.
(4) Change program mode
Changes from one program to another. When the instrument is started, the
program used last is launched.
To Next Page
Loading...