Tosok CAG2000 - Program Management and Settings; 8. Changing Programs

16
8. Changing Programs
 In the measure mode, press for 2 sec or more.
 The SET LED below the bargraph display comes on green, “PROG” appears on
the alphanumeric display, and the instrument changes to the change program
mode.
Fig. 8-1. Changing to change program mode.
 With “PROG” shown on the alphanumeric display, press . The current
program number is shown on the alphanumeric display.
Fig. 8-2. Display of current program number.
2
1
3
SET
MAS
ENT
RST
SET MAS
PROG
2
1
3
SET
MAS
ENT
RST
SET MAS
10.0
Press 2 sec
or more
Measure mode Change program mode
2
1
3
SET
MAS
ENT
RST
SET MAS
PROG
2
1
3
SET
MAS
ENT
RST
SET MAS
2
Press