10
Installation
Tools Required
Replacing the Batteries
1. Press the back side of the remote control
battery cover and slide out following the
engraved arrow.
2. Replace with two new AAA(1.5V) batteries
(not included) of the same make and model.
Make sure the polarities (+ & -) are aligned
correctly.
3. Reinstall the battery cover box.
reinstall
remove
battery
cover of battery box
The following tools will be needed before starting installation.
Phillips head screwdriver
tape measure
flat head screwdriver
scissors
saw
pencil
To Next Page
Loading...
Need help?
General
