07
Installation
Warning
● The air conditioner has been designed for use in recreational vehicles.
● Be careful when testing the unit. Do not operate the unit with the exterior case
removed.
● Outdoor unit can't be installed at the low recess of the roof of the vehicle. It must
be mounted on the flat surface of the roof to make sure rain, car-washwater,
condensated water, etc. can be drained smoothly. No water is allowed to be
accumulated around the outdoor unit. Otherwise, it will cause malfunction or
safety hazards as the water will pour into the air conditioner.
● There must be 1.2 to 5.32 inches between the RV ceiling and roof.
Required Tools
1. Screwdriver
2. Electric Drill with 1/8” drill bit
3. Bubble Level
4. Pencil
5. Torque Wrench (0-60 in-lbs)
6. Ruler
7. Scissors
To Next Page
Loading...
Need help?
General
