Note: This button is not valid under dry and fan model.
19
Swing Button
Press this button to activate the automatic air swing function.
ON/OFF Button
Press to power the air conditioner ON or OFF.
+/- Button
● Pressing this button will allow you to change the temperature setting.
● After pressing the timer button, the +/- buttons will adjust the timer setting from
0.5-24 hours in 0.5-hour increments. After the 10-hour mark, the +/- button will
adjust the timer setting in 1-hour increments. It will take 5 seconds for the timer
settings to be confirmed by the machine.
Fan Speed Button
Pressing this button will cycle the fan speed through LOW, HIGH, and TURBO.
Filter Check Button
After 250 hours of operation the Filter Check button will illuminate to remind you
to remove and clean the filter.
When you re-install the air filter and turn on the unit, the light will still be on.
Pressing this button will turn off the light.
Timer Button
● When the unit is running, press this button to schedule when the unit will power
off by using the +/- button to adjust the length of time before powering off.
● When the unit is not running, press this button to schedule when the unit will
power on by using the +/- button to adjust the length of time before powering on.
Mode Button
Pressing this button will cycle through the following modes through COOL, DRY,
FAN, and HEAT.
4
3
2
1
5
6
7
To Next Page
Loading...
Need help?
General
