Operating Manual
69-2265EFS—01 12 570-212
ENGLISH
This feature helps prevent damage to the
compressor in your air conditioning or heat
pump system.
Damage can occur if the compressor is
restarted too soon after shutdown. This fea-
ture forces the compressor to wait for a few
minutes before restarting.
During the wait time, the display will flash the
message Cool (or Heat if you have a heat
pump). When the safe wait time has elapsed,
the message stops flashing and the compres-
sor turns on.
Message flashes until safe restart
time has elapsed
Built-in compressor protection
To Next Page
Loading...
