- 2 -
WARNINGS
People with disabilities, mental disabilities, or lack of common
sense (including children) should use this product under
supervision of assigned personnel.
Do not use loose power sockets.
Failure to do so may result in a fire or electric shock.
Never splash water on the power plug or the controller.
The auto faucet is an electrical appliance, this may cause
product malfunction.
Do not use a power source other than the specified power
source (AC 220 V-240 V).
Failure to do so may result in a fire or electric shock.
Do not exceed the rated power of the socket or patch panel.
Failure to do so may result in a fire.
Do not bend the power cord, place heavy objects on the cord,
nor handle improperly.
Failure to do so may result in a fire.
Do not process the power cord (cut or connect power cord).
Failure to do so may result in accidents like a fire or product
malfunction.
Do not plug or unplug the power plug with wet hands.
Failure to do so may result in electric shock.
Do not contact the wire plug during thunderstorms.
Failure to do so may result in electric shock.
Do not place the auto faucet in a high humidity area such as
a bathroom.
This may cause damage.
Ignoring the content in this column and improper use
could result in personal death or serious injury.
Please entrust the installation of this product to qualified
professionals.
WARNINGS
CAUTION
Never disassemble, reassemble, repair or modify the
Automatic Faucet, unless you are an electrician, or qualified
service person.
This may cause property damage or personal injury.
Please be sure to consider the installation location of the
power socket or waterproof socket to avoid water exposure
from condensation on the water inlet pipe or splashing of
water droplets during use.
Always close the stop valves before removing the filter.
Failure to do so may result in scald injuries and defacement
of family property due to the jet of hot and cold water.
The socket installation position should comply with relevant
design codes.
Hold the power plug and pull it out when unplugging the
power supply.
It may damage the outlet and power cord, then causes fire or
electric shock when unplugging the power supply.
Please be sure to insert the plug completely.
Failure to do so may result in a fire or electric shock.
For AC type, if dust accumulates on the power plug, moisture
may compromise the insulation and cause a fire.
Please unplug the power plug and wipe with a dry cloth (once
a month). After wiping, use silicone for waterproofing.
Do not force or strike.
Failure to do so may result in product malfunction or a leak.
Do not use on vehicles, boats, or other mobile objects.
Ignoring the information in this column and improper use
could result in personal injury or property damage.
To Next Page
Loading...
Need help?
General
