- 4 -
3. INSTALLATION PROCEDURE2. STRUCTURAL PARTS
3
sensor sensor
TLE01501*
TLE01502*
TLE03501*
TLE03502*
TLE04501*
TLE04502*
ECOPOWER type only
Backup
battery
1
Before Installation
2
Spout
Controller
Counter type Wall type
The shape of the actual product may differ somewhat from drawings
depending on the model number.
After supplly electricity, sensor will set up automaticlly
(about 20 seconds)
1. This is non-rechargeable battery is not to be recharged.
2. Must replaced with battery from TOTO.
3. Battery is to be inserted with correct polarity.
4. Exhausted battery is to be removed from the appliance
and safety disposed of.
5. if the appliance is to be stored unused for a long period,
the battery should be removed.
6. The supply terminals are not to be short -circuited.
To Next Page
Loading...
Need help?
General
