- 6 -
3. INSTALLATION PROCEDURE
DC type
AC type
1 2
3 4 5
Connect the Spout to the Controller
The shape of the actual
product may differ somewhat
from drawings depending on
the model number
Please check battery pole in right
way when you put in battery case.
If sensor not working, please change
new battery AA type 2 units.
1. These are non-rechargeable batteries are not to be
recharged.
2. Different types of batteries or new and used
batteries are not to be mixed.
3. Exhausted batteries are to be removed from the
appliance and safely disposed of.
4. If the appliance is to be stored unused for a long
period, the batteries should be removed.
5. The supply terminals are not to be short-circuited.
After supply electricity, sensor will set up
automatically (about 20 seconds)
Battery
(1.5V x2UT)
Cover
Caution
Put Battery (TLE0450**)
To Next Page
Loading...
Need help?
General
