Townsend Labs Sphere L22 - Sphere L22 Installation and Configuration; System Requirements

Townsend Labs Sphere L22 Precision Microphone System Guide
9
Chapter 2: Installation and Configuration
This section shows you how to install and configure your Sphere system:
• Establish whether your system meets the System Requirements.
• Install the Sphere plug-in software on Mac and Windows.
• Remove the Sphere plug-in software.
• Connect the Sphere microphone to your preamp.
• Instantiate the Sphere plug-in on a stereo DAW track.
• Calibrate the left and right preamp channels.
System Requirements
The following plug-in formats are supported:
• UAD
• AAX Native
• VST2
• VST3
• Audio Units (Mac only)
The following operating systems are supported:
Native (AAX, VST, and AU):
• Mac OSX 10.8.5 and above
• Windows 7 and above
Apollo Interfaces and UAD-2 hardware (AAX, VST, AU, and RTAS):
• See http://uaudio.com/downloads for current info.
Your computer must meet the following system requirements:
• Native (AAX, VST, and AU) installation requires 200 MB free disk space.
See http://uaudio.com for UAD disk space requirements.
• 1024 x 768 minimum display resolution
• Internet connection to download software
• Two microphone preamplifiers with phantom power
• Compatible plug-in host application (DAW) software supporting AAX, VST2, VST3, AU, or UAD